Exports the selected layout as a .zip with one DXF per sheet (mm, R12). Parts keep their original layers; the sheet outline is on its own SHEET layer so you can switch it off.
Only the parts you ordered are placed, packed from the left edge so the offcut stays one clean strip. Spacing is edge to edge on the true outer profile. Holes are not filled with smaller parts.
One row per material and thickness. Speed and pierce time drive machine time; R/m and R/pierce are used when you charge by rates. Leave machine R/h blank to use the shop rate. Starter rows are example values: replace them with your own cut chart.
| Name | Thick mm | Density g/cm³ | Price R | per | Speed mm/min | Pierce s | Gas | Gas m³/h | R / m | R / pierce | Machine R/h |
|---|
Example values. Set these to your own machine, power and gas costs.